LUTZE Cablefix® One Cable Entry System
Kits include frame, hardware and seals
UL Type 4X, 12, 13 and IP65
LUTZE Cablefix® One cable entry systems are suitable for cables with or without pre-installed connectors. Order pre-configured kits under one part number or design a custom kit exactly for your application. Layered seals cover the entire clamping range specified for each entry point and unused deals are closed by default (if not peeled), no blanking plugs. Strain relief per EN 62444
One Kit. One Part Number. Easy Ordering.®
4 Cable Entry Kit
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606500 | Cablefix® One 4 Entry Kit | 2 Small | 2 x 3.5 - 15.5 |
| 2 Large | 2 x 15.5 - 29.5 |
7 Cable Entry Kit
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606501 | Cablefix® One 7 Entry Kit | 6 Small | 6 x 3.5 - 15.5 |
| 1 Large | 1 x 15.5 - 29.5 |
10 Cable Entry Kit
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606502 | Cablefix® One 4 Entry Kit | 10 Small | 10 x 3.5 - 15.5 |
Design a custom Cablefix® One kit for your exact application
And Right Hand Industrial can issue you one part number for simple ordering
Seals
1.Select a frame by determining the number of cables / entry points needed and the size of those cables
2. Select one seal for each entry point based on the clamping ranges below. Each entry point must have a seal, unused deals are closed by default
3. Request one part number from Right Hand Industrial at the time of quotation
Frames
4 Cable Entry Frame
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606507 | Cablefix® One 4 Entry Frame | 4 | Dependent on seal selection |
7 Cable Entry Frame
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606508 | Cablefix® One 7 Entry Frame | 7 | Dependent on seal selection |
10 Cable Entry Frame
:| Part Number | Description | # of Entry Pts | Clamping Range (mm) |
|---|---|---|---|
| 606509 | Cablefix® One 10 Entry Frame | 10 | Dependent on seal selection |
-
UL Type 4X, 12, 13
-
IP 65
-
RoHS
-
Cables installed easily by pushing the end through the seal from the front
-
Integrated seal protects up to UL 4X, 12, 13, and IP 65
-
Saves up to 50% installation space and 80% installation time vs. individual cable glands
-
Easy to install: can be mounted with provided bolts or snapped directly into enclosures with a 1.5mm wall thickness
-
Entry points are sealed by default, no blanks plugs needed
-
standard 112 x 36mm cut-out
Customer Service
In a lean distribution model, everything is done with the customer in mind. There is nothing lean about our customer service, paramount here at Right Hand Industrial. From general questions and quotations through delivery, we are your trusted "right hand" for quality electrical wire and cable, connectors, automation components and cable management solutions for industrial applications.