LUTZE A2202/003

2/0, 3 conductor + 8 AWG,  3 grounds, DRIVEFLEX ® VFD Cable

1000V UL Flexible VFD Servo Cable, WTTC, 600V UL TC-ER

Shielded construction:

Configuration: 2/0 / 3C + 8AWG / 3-Symmetrical Grounds

Conductor: class K stranded bare copper, AWG

Insulation: XHHW-2 type XLPE

Color code: black w/ white #s, green/yellow grounds

Shielding: foil tape, tinned copper braid and drain wire

Jacket: oil resistant PVC, black


OD Ø­ (mm / in): 39.2 / 1.54″



1000V UL Flexible VFD Servo Cable 90C

1000V WTTC


-40°C – +90°C static

Minimum Bending Radius: 

7.5 x cable OD fixed

Oil Resistance: 

Oil Res II

  • UL Type Flexible Motor Supply Cable, Flexible VFD Servo Cable up to 4/0

  • Meets NEC 336, 392

  • Class I & II, Div. 2 and Class I Zone 2 per NEC 501, 502, 505

  • UL Types WTTC, TC-ER, 1277, 2277

  • c(UL) TC, CIC FT4, CE

  • P-07-KA130021-MSHA

  • RoHS


  • Flexible, low capacitance XLPE conductors, ideal for high voltage spikes and long cable runs

  • Three symmetrical, insulated grounds (PEs) help to reduce stray currents in motor shaft and bearings

  • Effective dual layer shield resists both high and low frequency for best EMC results

  • Non-wicking fillers

  • Specially formulated PVC jacket for oil resistance and easy strip design

  • Crush impact resistant

  • Gas/vapor-tight sheath per UL 1277

  • Sunlight resistant

  • Flame retardant

  • Direct burial

  • Talc and Silicone free

  • Compliant with NFPA 79 for wiring of industrial machinery

  • TC-ER for use with cable trays without conduit, which can reduce material and labor costs

  • WTTC – wind turbine tray cable rating for use in wind power generation

  • Dry, damp or wet conditions