LUTZE A2200203
2 AWG, 3 conductors + 10 AWG, 3 grounds, DRIVEFLEX® VFD Cable
1000V UL Flexible VFD Servo Cable, WTTC, 600V UL TC-ER
Shielded construction:
Configuration: 2AWG / 3C + 10AWG / 3-Symmetrical Grounds
Conductor: class K stranded bare copper, AWG
Insulation: XHHW-2 type XLPE (power cond. + grounds)
Color code: black w/ white #s, green/yellow grounds
Shielding: foil tape, tinned copper braid and drain wire
Jacket: oil resistant PVC, black
OD Ø (mm / in): 29.3 / 1.155″
Voltage:
600V UL TC-ER
1000V Flexible VFD Servo Cable 90C
1000V WTTC
Temperature
-40°C – +90°C static
Minimum Bending Radius
7.5 x cable OD fixed
Conductor Marking
Black with white numbers and one green/yellow ground
Oil Resistance
Oil Res II
-
UL Type Flexible Motor Supply Cable up to 4/0
-
Meets NEC 336, 392 Class I & II, Div. 2 and Class I Zone 2 per NEC 501, 502, 505
-
UL Types WTTC, TC-ER
-
c(UL) TC, CIC FT4, CE
-
UL 1277, UL 2277
-
P-07-KA130021-MSHA
-
RoHS
-
REACH
-
Flexible XLPE conductors
-
Three symmetrical, insulated grounds (PEs)
-
Non-wicking fillers
-
Effective dual layer shield for best EMC results
-
Specially formulated jacket for oil resistance and easy strip design
-
Crush impact resistant
-
Gas/vapor-tight sheath per UL 1277
-
Low capacitance cable
-
Sunlight resistant
-
Flame retardant
-
Direct burial
-
Talc and Silicone free
-
1 kV rated XLPE insulation with low capacitance, ideal for applications with high voltage spikes and long cable runs
-
Compliant with NFPA 79 for wiring of industrial machinery
-
TC-ER for use with cable trays without conduit, which can reduce material and labor costs
-
WTTC – wind turbine tray cable rating for use in wind power generation
-
Dry, damp or wet conditions